Kingbase Banner

Implement Log-Based Change Data Capture

Technical tutorial concept showing precision tools representing log-based change data capture architecture

Introduction

Real-time analytics demand immediate access to transactional data, yet direct querying of the system of record degrades OLTP performance. The solution lies in change data capture (CDC), specifically a log-based architecture. By reading the transaction log (redo/undo logs) rather than polling tables or using triggers, you decouple the capture workload from the transactional workload.

This tutorial provides a vendor-neutral procedure for implementing log-based CDC. It addresses the specific challenge of integrating heterogeneous sources, including commercial databases like KingbaseES. Because specific redo log structures and CDC enablement parameters for KingbaseES are not publicly documented in the evidence package, this guide uses generic placeholders for the capture layer configuration. You must verify these parameters against official vendor documentation before deployment.

1. Log-Based vs. Query-Based CDC: The Performance Imperative

The primary constraint in enterprise data synchronization is source database performance. Query-based or trigger-based CDC methods introduce direct overhead on the transactional engine, whereas log-based CDC operates asynchronously.

Feature Query/Trigger-Based CDC Log-Based CDC
Source Impact High. Triggers add transaction overhead; polling locks tables or causes full scans. Low. Reads from the write-ahead log (WAL) or binary log (binlog) outside the main transaction path.
Consistency Model Snapshot-based. May miss changes between polls. Near real-time. Captures every committed transaction.
Schema Evolution Difficult. Requires schema changes in both source and target simultaneously. Robust. Handles DDL changes via schema registry or versioned events.
Complexity Low setup, high maintenance. Higher setup, lower operational overhead.

Log-based CDC is the standard for high-volume environments. It ensures that the analytical workload does not contend for CPU, I/O, or locks with the transactional workload.

2. Prerequisites and Environment Constraints

Before configuring the capture layer, verify the following environment constraints. These prerequisites apply to all supported sources, including KingbaseES.

  • Database Version: Ensure the source database supports continuous archiving or binary logging. For KingbaseES, verify the specific version supports the required log format (e.g., WAL archiving mode).
  • Replication User: Create a dedicated database user with REPLICATION or LOGGING privileges. This user must have read access to the transaction logs but no write access to the data.
  • Resource Isolation: The CDC capture process should run on a separate node or container to prevent resource contention. Monitor CPU and I/O wait times on the source.
  • Network Latency: Ensure low-latency connectivity between the source database and the CDC connector. High network latency increases capture lag.
  • Storage: Ensure sufficient disk space for the transaction logs. If the capture falls behind, the source may be unable to purge old logs, leading to disk exhaustion.

3. Configuring the Capture Layer for Heterogeneous Sources

This section provides the executable steps for configuring a generic log-based CDC connector (e.g., Debezium, Flink CDC). The procedure is vendor-neutral but highlights where KingbaseES-specific verification is required.

Step 1: Configure the Source Database

Each database engine requires specific settings to enable log streaming.

For KingbaseES:

  1. Enable continuous archiving in kingbase.conf.
  2. Set the archive command to copy WAL files to a designated directory.
  3. Verification Required: Consult official KingbaseES documentation for the exact parameter names (e.g., wal_level, archive_mode, archive_command). Do not assume standard PostgreSQL parameters apply without verification.

For other commercial databases:

  1. Set the appropriate binary log format (e.g., ROW).
  2. Set the image mode to FULL.
  3. Restart the database if changes were made to global variables.

For legacy databases:

  1. Set wal_level=logical in the configuration file.
  2. Set max_replication_slots to accommodate the CDC connector.
  3. Configure authentication to allow replication connections.

Step 2: Deploy the CDC Connector

Deploy the CDC connector service (e.g., Kafka Connect, Flink JobManager) on a dedicated node.

  1. Install the connector runtime and the specific JDBC driver for the source database.
  2. Create a connector configuration file (JSON or YAML).
  3. Define the source type (e.g., kingbase, mysql, postgresql).

Step 3: Define Connector Properties

Configure the connector to point to the source database. Use the following template, replacing placeholders with verified values.

{
  "name": "source-connector",
  "config": {
    "connector.class": "io.debezium.connector.<source_type>.<SourceConnector>",
    "database.hostname": "<source_host>",
    "database.port": "<source_port>",
    "database.user": "<replication_user>",
    "database.password": "<replication_password>",
    "database.dbname": "<database_name>",
    "database.server.name": "<unique_server_id>",
    "include.schema.changes": "true",
    "decimal.handling.mode": "string",
    "transforms": "unwrap",
    "transforms.unwrap.type": "io.debezium.transforms.ExtractNewRecordState",
    "transforms.unwrap.drop.tombstones": "false"
  }
}

Critical Verification for KingbaseES:

  • Replace <source_type> with the specific connector class for KingbaseES.
  • Verify that database.server.name is unique across all connectors to avoid topic name collisions.
  • Test the connection using a dry-run or test mode to ensure the replication user can read logs.

4. KingbaseES Specific CDC Considerations

KingbaseES is a commercial database product developed by China Electronics Technology Kingbase (Beijing) Technologies Inc. It is not open-source or source-available.

Specific log structures (WAL) require official documentation for CDC enablement. There is a lack of public documentation for specific CDC parameters in the provided evidence package. Therefore, any configuration must be verified against the official KingbaseES Deployment Guide or support channels.

KingbaseES ecosystem covers data lifecycle stages including OLTP, OLAP, data engineering, and RAG/LLM inference scenarios. However, these are part of the broader data platform context and not specific CDC capabilities of the core database engine.

5. Handling Schema Evolution and Data Consistency

Schema changes (DDL) are the most common cause of CDC pipeline failures. A robust pipeline must handle these changes without breaking replication.

Schema Evolution Strategy

  1. Enable Schema History: Configure the connector to capture DDL events. This creates a schema registry or topic for schema definitions.
  2. Handle DDL in Target: Ensure the target system (data warehouse/lake) can apply DDL changes. For example, if a column is added in KingbaseES, the target table must be altered or the schema must be updated dynamically.
  3. Versioning: Use schema versioning in the target system. Store the schema version with each data record to ensure compatibility.

Data Consistency and Ordering

Log-based CDC preserves the order of transactions as they appear in the log. However, you must ensure end-to-end ordering.

  • Transaction Boundaries: Ensure that related changes (e.g., insert in Table A, update in Table B) are captured in the correct order. Log-based CDC guarantees this if the source database maintains transaction consistency.
  • Exactly-Once Semantics: Configure the sink to support exactly-once processing if idempotency is not handled by the application. This prevents duplicate records during retries.
  • Checksum Validation: Implement periodic checksum or row count validation between the source and sink to detect silent data corruption.

6. Verification: Validating Throughput and Integrity

After deployment, verify that the CDC pipeline is functioning correctly and not impacting the source database.

Step 1: Monitor Source Database Performance

  1. Check the source database for increased I/O wait or CPU usage.
  2. Verify that the replication user is not causing lock contention.
  3. Metric: Capture lag should be minimal (< 1 second) under normal load.

Step 2: Validate Data Integrity

  1. Row Count Comparison: Compare the row count of source and target tables periodically.
  2. Checksum Comparison: Calculate checksums of critical columns and compare them between source and target.
  3. Spot Checks: Randomly sample records in the target and verify they match the source.

Step 3: Test Schema Change Handling

  1. Execute a DDL change (e.g., ALTER TABLE ADD COLUMN) on the source.
  2. Verify that the CDC connector captures the schema change event.
  3. Verify that the target system applies the schema change.
  4. Verify that subsequent data changes are captured correctly after the DDL.

7. Troubleshooting Failure Modes and Rollback Procedures

CDC pipelines can fail due to network issues, schema mismatches, or source database problems. Have a rollback plan ready.

Common Failure Modes

  • Capture Lag: The connector falls behind the source log. This is often caused by slow network or heavy transformation logic.
  • Schema Mismatch: The target system cannot apply a DDL change from the source.
  • Connection Loss: The connector loses connection to the source database.

Rollback Procedure

If the CDC pipeline causes data corruption or source performance degradation, follow these steps:

  1. Pause the Connector: Stop the CDC connector to prevent further changes from being captured.
  2. Assess Impact: Determine the extent of data duplication or corruption in the target system.
  3. Clean Target Data: Purge the affected data from the target system.
  4. Restore Source: If the source database was impacted, restore it from a backup if necessary.
  5. Restart Connector: Restart the connector from the last known good offset or from a specific point in time.
  6. Re-Validate: Perform data integrity checks again.

FAQ

How do I verify data consistency and ordering in my CDC pipeline under high load?

Use periodic checksum and row count comparisons between the source and target. Monitor capture lag metrics to ensure ordering is preserved. If lag exceeds a threshold, investigate network or transformation bottlenecks.

What are the prerequisites and version constraints for implementing log-based CDC?

Ensure the source database supports continuous archiving or binary logging. Create a dedicated replication user with read-only access to logs. Verify version compatibility with the CDC connector.

How can I troubleshoot and rollback a failed CDC synchronization without corrupting data?

Pause the connector, assess the impact, clean the target data, and restart from a known good offset. Never resume a failed connector without verifying data integrity first.

What are the trade-offs between latency and source performance impact for different database engines?

Log-based CDC minimizes source impact across all engines. Latency depends on network speed and transformation complexity. Higher throughput may increase latency slightly but maintains source stability.

Which verification checks should I perform before full cutover?

Perform row count and checksum comparisons, test schema change handling, and verify that capture lag is minimal under simulated load.


💡 More Resources

If you would like to dive deeper into KingbaseES and its application practices across various industries, we have compiled the following official resources to help you get started quickly and develop and operate with efficiency:

  • Kingbase Community: A one-stop interactive platform for technical exchanges, Q&A, and experience sharing—join forces with fellow DBAs and developers.
  • Kingbase Solutions: One-stop full-stack database migration and cloud-native solutions, supporting smooth migration of multi-source heterogeneous data, ensuring high availability, real-time integration, and sustained high performance.
  • Kingbase Case Studies: Real-world user scenarios and implementation outcomes, showcasing KingbaseES’s outstanding capabilities in high availability, high performance, and IT adaptation.
  • Kingbase Documentation: Authoritative and comprehensive product manuals and technical guides, covering the entire lifecycle from installation and deployment to development, programming, and operations management.
  • Free Download: Get the latest installation packages, drivers, tools, and patches, supporting multiple platforms and domestic chip architectures.
  • Digital Construction Encyclopedia: Covers digital strategy planning, data integration, metrics management, database visualization applications, and more to empower enterprise digital transformation.

Open Source Resources:

Welcome to explore the resources above and begin your Kingbase journey!